Fone de ouvido so funciona se conectar a metade como resolver em casa

Hi, I hope you're doing well. In today's video, I'm going to talk about headphones that only work if you connect half of the plug to your phone. Before explaining how you can fix this at home, I need to tell you the reasons why this happens. First, the pins might be broken. In this case, you'll have to take your device to a repair shop to have the P2 connector removed from your phone. And lastly, and I hope this is happening to you, the most likely cause is oxidation. Because your phone is in your pocket, it accumulates dust and moisture, causing the internal pins to oxidize. When you connect the headphones, it doesn't recognize them. Then, when you connect only half of the headphones, it ends up working. But I don't know if you've noticed that when you connect only half of the headphones, it's as if the audio is mixed, meaning both the left and right headphone outputs produce the same sound. This is because the sound isn't equalized. Your headphones have four separate pins, but you can only see the little gaps; each gap represents a type of equalization on your phone. In other words, your headphones work. Here's how it works: one earphone will output bass and sound, and the other will output more audio than bass. But how can you solve this at home? Well, if you have oxidation problems on your device, you can use a cotton swab or a skewer (which also works, but you'll need cotton balls), so it's easier to use a cotton swab that already has cotton and a stick. You'll also need acetone, vinegar, or lemon juice because both contain acids capable of removing oxidation. You'll use one of these components to clean the P2 jack on your phone. Remember to remove any excess product before using it. Place your phone with the P2 jack face down, connect the cotton swab, and rotate it only in one direction. Do not rotate clockwise or counter-clockwise. If you start rotating clockwise, always stop clockwise. Do not change the rotation because if you change the rotation while the cotton swab is inside the P2 jack, the cotton might get stuck. If this video helps you, don't forget to... Leave your comment below.