Kit Sacada Clean ORION, respondendo 5 dúvidas

In this video, we answer 5 very peculiar questions, starting with Valter Sales' question, as it reopens a discussion where it's necessary to analyze the factors that guarantee efficient or inefficient sealing. Valter Sales Is this type of system water-resistant? How does the glass meet? The first factor we need to analyze is how the ABNT NBR 16259 standard for balcony glazing systems describes these glazing systems: A system composed of sliding, pivoting, and/or fixed safety glass panels, which aims to provide partial protection against inclement weather for a balcony or veranda. This system does not function as a guardrail or watertightness, being an auxiliary system for closing the opening. This standard is from 2014. However, since then, some companies have worked to develop more efficient systems IN TERMS OF WATERTIGHTNESS, and just look at the Clean Orion Balcony Kit to see that this evolution is clear! The rail trims seal any gaps that may remain at the joints of the rails. Double sealing with moldable polypropylene brush between the rail and the upper rails; the lower rail is always in contact with the rail. Seals between glass and glass are made with self-adhesive polypropylene brushes. Seals between glass and masonry are made with terminals, corner pieces, and U-profiles. And here's a great tip: perform double sealing on the profiles, as this eliminates the danger of water leaks and noise, such as those whistling sounds caused by the wind. Alan Isackson Good evening Gabriel, up to what width and height does this rail support? 600 x 2200 = 10mm (infinite width span and 2350/2400 height) Adalto Gomes Gabriel, I would like to know the depth of the rail cutout for the pins. Thank you and I really enjoy your channel. “CUTOUTS” WIDTH 14 x 11 mm HEIGHT Here I will answer two questions, from: Rodrigo Oliveira: I will wait for the next video explaining the discount measurements. I am a glazier but I have never installed this system. And from: Edwilson Gonçalves: Good evening, are the clearances for the balcony without pulleys the same as for the balcony with pulleys? No, the height clearance of the glass changes! For the Orion balcony kit (traditional with bearings), To find the height measurement of the glass panels: opening height – 170mm (considering the smaller measurement) For the Clean Orion balcony kit (without bearings), To find the height measurement of the glass panels: opening height – 150mm (considering the smaller measurement) The clearance at the glass junction is 4mm for both kits. And between glass and masonry, the clearance is 10mm for both kits. REMEMBER THAT WITH THE “Clean Orion Balcony Kit” YOU HAVE 6 COLOR OPTIONS: WHITE / BLACK / MATTE / BRONZE 1001 / 1002 and 1003 AND KITS WITH WIDTHS OF: 2.50 / 3.00 / 3.50 / 4.00 / 5.00 and 6.00 m AND STANDARD HEIGHT FOR “U” and “L” PROFILES WITH A HEIGHT OF 2.20 m