True Vacuum Sound Symposer Delete Install | Focus ST | Turbo Flutter!

I install a true vacuum line from the boost port on the sound symposer delete kit plate using factory clips and zip ties. Vacuum tubing is 3/16in inner diameter and 5mm thick. You also need a vacuum end cap 3/16in inner diameter. Link to the vacuum tubing: https://www.amazon.com/gp/product/B08... I went with the 5mm thick tubing as the clamps fit nicely over them. For the vacuum cap - try your local hardware store and get 3/16in inner diameter. For the plate you need an 8mm socket or wrench and for the clips you need a pair of plyers. I also used a flat head screwdriver to remove the tubing as its very difficult to pull off by hand. It seems CJ Pony Parts has run out of the ACCELATEC sound symposer delete kit with the boost port option (but they do have the regular block off plate option). They also have other brands with the boost port option so check those out! See the Steeda option: https://www.cjponyparts.com/steeda-so... Current Mods on the Focus: COBB Cold Air Intake, Borla Catback Exhaust, Cobb Accessport, Stage 2 Tune on 91 Octane, Mishimoto Front Mounted Intercooler, Turbosmart BOV, Rally Innovations Front Splitter 3-Piece Matte Black Aluminum, Fully Torqued Racing adjustable splitter support rods 7.5-9.25in with upgraded hardware, RokBlokz Mudflaps in Orange, DMB UK Replacement ST Badges (in gloss orange), Fanatic Wraps Emblem Overlays (Ford Emblem on Focus ST in Orange w/ carbon fiber background), Velossa Tech Big Mouth Snorkel in Orange, Boosted Designs ST Dead Pedal, Option Lab 10 Spoke Onyx White Wheels 18x8.5 40mm offset, Velossa Tech Wing Riser Kit with Orange Spacers. Geartronics Dynamic Blinker Led Turn Signal Lights Smoked. ACCELATEC Sound Symposer Delete Kit with boost port option.