4Techs Gleitschienen - Montage Deines CrossCut Schiebeschlittens

Hello everyone! In this short video, I will show you how to assemble my play-free slide rails and build what I consider to be the best sliding carriage. I am using a 12 mm thick screen printing plate made of multiplex. With the smooth side facing down, it glides like hell! Backlash-free slide rails – available for many different circular saws, take a look around my webshop! Here are the ones for the GTS10XC: https://www.4techs.de/collections/bos... Bosch 635-216, DeWalt, Makita 2704, Einhell 254-T – all 3/4 inch grooves with a clear width of 19 mm at the top: https://www.4techs.de/collections/dew... Bosch PTS10: https://www.4techs.de/collections/bos... Metabo: https://www.4techs.de/collections/met... Einhell TE CC 250 UF: https://www.4techs.de/collections/ein... Bosch GTS10XC and 635-216 owners are delighted with the extraction hood: https://www.4techs.de/products/absaug... For absolute precision on the GTS10XC, use these sliding blocks to unlock the fixed sliding carriage: https://www.4techs.de/collections/bos... Any questions? Feel free to write them in the comments! Have fun! Chapters: 00:17 Adjusting the width of the slide rails 00:39 Marking the drill axes 01:21 Aligning and marking the drilling centres 01:57 Drilling and countersinking vertically 02:43 Mounting the slide rails 03:13 Inserting and aligning 03:49 Making the cross stop, sawing in, aligning 05:15 Final test – checking the right angle