Door Hinge Replacement | Ford F-350

The front doors on this F-350 were hard to close thanks to the hinges being severely worn, and the door had to be lifted up to be able to close all the way. While this video is only 3 minutes long, be warned this job will take several hours to complete. There is an alternative way to replace the front hinges that involves removing the front fender panel, but either method you choose will be relatively difficult and time consuming. TRQ hinges used in this video (fit 1980-1997 F-350, as well as other models): https://amzn.to/3YuJFX8 Ratcheting wrench set: https://amzn.to/452qxSL (ad) Depending on the model, you may be able to replace the hinge pin and bushings without having to replace the entire hinge. However, if the door check-strap system doesn't hold the door open very well, replacing the entire hinge will fix that problem also. 0:00 Introduction 0:24 Tools Required 1:03 Mark hinge position 1:18 Remove door from hinges 1:40 Remove hinges from frame 1:53 Install new hinges 2:05 Reattach door 2:19 Make adjustments as needed ⚠ DISCLAIMER: While I strive to make the information provided in this video as accurate as possible, I make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Fix & Maintain is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.