How to install a slipon and gut a cat!

In this video I install a Graves slip on, remove the pre chamber and muffler. I remove the cat as well. See below tool list for web sight and more info! ****TOOLS NEEDED**** 8 mm socket or wrench 10 mm socket or wrench 14 mm socket or wrench small adjustable wrench optional Pliers optional 6" 3/8 extension 3/8 ratchet 4 mm allen wrench 5 mm allen wrench 6 mm allen wrench or (3/8 socket type recommended) Philips screw deriver #2 (If you only taking the cog off the servo a TAMPER PROOF t25) Long pry bar about 36" or something you can hit with a hammer to bust the cat out (do this at your own risk!) Hammer to hit the pry bar or tool of choice. Here is a link to the slip on I have http://www.gravesport.com/Graves-Moto... Also want to point out that Graves has a tune that you can have flashed into your ECU for the slip on. Some will say you don't need a tune and they are correct...but let me ask you this. Why spend all the money for a slip on and not put a tune in it to get the full results! **How to videos are to help gain a better understanding of what and how to fix/repair/ maintain something, I will not be held labial or responsible for anything that might/has/did go wrong! If you don't understand it or have any doubt about what ever it is that your doing seek professional help. ** All speeds displayed and sounds of engines racing have been digitally enhanced for your viewing pleasure, Video is 1 or more years old stock video. Please obey speed limits and local laws. All other riders, cagers and people in this video were unpaid stunt men/ women from Mexico