Nintendo DSi L/R Shoulder Button Repair (How Nintendo Would Do It)

In this video, as the rain buckets down, come join me to see how a Nintendo technician would repair your L/R Shoulder buttons if they've stopped working! A few tips! NEVER try to fix the buttons by blowing compressed air into the buttons. You will run a high risk of severing the ribbon cable for the top screen and destroy your DSi unit! Use a clean workspace and the PROPER tools. Don't improvise tools, as it may cause cosmetic damage and strip screw heads. Be gentle and don't over tighten screws. Take your sweet time. There is no rush, no competition, just a task at hand. Rushing increases the likelihood of a mistake which can cause damage, so take it slow and double check your work. If something isnt fitting right, check it. Make sure everything is as it should when reassembling the unit. This repair however works 95% of the time for the trigger buttons losing functionality OVER TIME. This method of repair most likely will NOT work if the buttons suddenly lose function after a drop or hard impact. This video is for entertainment purposes ONLY. I am NOT liable for damage caused to your unit if you follow this video as a guide. If you intend to repair your own unit in a similar fashion to how I do you must be at least semi-competent with delicate electronics repair. I make it look easy because I've been doing this for 15+ years. Tools used! 1/8 inch drive Philip's #000 bit. (Or equivalent) 1/8 inch drive mini pry tool. (Or equivalent) 1/8 drive reset pin tool. (Optional)