How To Replace A Gemmy Airblown Inflatable DC Low Voltage Fan

Here is a step by step instructional video on how to replace a Gemmy Airblown DC Brushless Low Voltage Fan (.5a, 1.0a, and 1.5a). Tools Needed for Repair: Diagonal Cutters, Channel Lock Pliers, Replacement Fan Kit. Step 1: Unzip inflatable. Find zip-tie holding fan in place. Carefully use the diagonal cutters to cut the zip-tie (be sure not to cut the inflatable) Step 2: Follow the light string to where the light and button meet. With channel lock pliers, gently grip the button pulling it off. Step 3: Insert new light string in through the zipper. Position light in pre-existing light hole. Secure light with button. Step 4: Insert zip-tie into designated sleeve. Step 5: Insert fan cord in through the main zipper and out the fan hole in the inflatable. Step 6: Position the fan so that the electrical cord is at the bottom of the inflatable. The rain guard should be at the top Step 7: While holding the fan in place secure the zip-tie. Make sure the zip-tie is in the fan groove. Insert remaining zip-tie into sleeve. Step 8: Make sure the light string is in the inflatable. Close the main zipper and INFLATE! We hope this step by step video was helpful. If you have any questions you can contact us here: https://yardinflatables.3dcartstores....