【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part0〕開封・初期投入オプション紹介編 / TAMIYA タミヤ【COMO's RC】

Assembling the TT-02 TYPE-S. [Part 0] Unboxing and Initial Option Introduction    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part0〕...   [Part 1] Parts 1-6    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part1〕...   [Part 2] Parts 7-13    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part2〕...   [Part 3] Parts 14-16    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part3〕...   [Part 4] Parts 17-19 https://    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part4〕...   [Part 5] 20-23    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part5〕...   [Part 6] 24    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part6〕...   [Part 7] 25-26    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part7〕...   [Part 8] 26-27    • 【TT-02 TYPE-S】じっくり組み立てるTT-02 TYPE-S〔Part8〕...   Electric RC Car Series No. 600 Item No. 58600 1/10 RC TT-02 TYPE-S Chassis Kit 1/10 SCALE R/C 4WD HIGH PERFORMANCE RACING CAR TT-02 TYPE-S CHASSIS KIT https://bit.ly/3CwTQDS ☆★Optional Option★☆ ●Tamiya Hop-Up Options No. 1965 OP. 1965 TT-02 TYPE-S Aluminum LT Steering Set 54965 https://bit.ly/42ArbIP ●Square Titanium Hex Screw Set (for Tamiya TT-02 TYPE-S) [STD-254]] ●Tamiya Hop-Up Options No. 1799 OP. 1799 TT-02 High Torque Servo Saver Set with Aluminum Horn RC Parts 54799 https://bit.ly/40RIMKW ~~From the official website~~ [A level-up chassis for beginners looking to step up their game] This upgraded version of the TT-02, the basic shaft-driven 4WD chassis with excellent drive efficiency, allows for customizable settings for each component, making racing even more enjoyable. The suspension features reversible suspension arms. High-rigidity metal suspension mounts are used, and the rear toe-in is set at 3 degrees. CVA oil dampers are mounted on special 3.0mm thick FRP damper stays. The damper mounting angle and rebound stroke have been optimized to improve performance over bumps. Additionally, turnbuckle shafts are used for the upper arms and steering linkage, allowing for adjustment of camber angle and front toe angle. The drivetrain features full bearings, and the cup joints and driveshafts are all-metal, further improving power transfer efficiency. [Main Features] ● Reversible suspension arms ● CVA oil dampers ● Special FRP damper stays (front and rear) ●Metal suspension mounts (rear toe-in set to 3 degrees) ●Wheel axles, gearbox joints, and drive shafts are all-metal ●Drivetrain features full bearings ●Upper arms and steering linkage use turnbuckle shafts ●Metal die-cast hex hubs [Basic Specifications] ●Chassis length: 385mm, width: 187mm ●Wheelbase: 257mm ●Tire width/diameter: 24mm (front and rear)/64mm ●Bathtub-type frame ●Drivetrain: Longitudinal motor, shaft-driven 4WD ●Front and rear resin 4-bevel differentials ●3-piece steering tie-rod ●4-wheel double wishbone suspension ●CVA oil dampers ●Gear ratio: 8.27:1 (10 gear ratios from 11.38:1 to 7.28:1 can be selected with the separately sold pinion) ●Torque-tuned motor ●Drivetrain features full bearings ●Speed ​​controller: ESC (sold separately) [Items to be purchased separately] ●Fine Spec 2.4G Electric RC Drive Set ●Transmitter Power Supply (4 AA Batteries) ●Various 1/10 Scale Touring Car Bodies Features the race-proven reversible suspension arms (ITEM 51297). Newly designed metal suspension mounts are used front and rear, with turnbuckle upper arms. Newly designed front and rear FRP shock stays are used. Combined with CVA oil dampers, they deliver superior road-holding performance. The driveshaft and cup joints are made of high-strength, all-metal. ★Blog "RC Hikikomori"★ Please also see the following: https://hikicomogomo.com/category/rc/ Voice: "VOICEVOX: Shikoku Metan" #XVX #SpringInsertion #SpringInsertionMan ★☆BGM☆★ Music by DOVA-SYNDROME is featured. https://dova-s.jp/