ÇELİKEL CHOPPER - (FORAGE HARVESTER- OT SİLAJ MAKİNESİ)

Çelikel Forage is an ideal machine to harvest forage, alfalfa, flowering plants, beet leaves, carrot leaves etc. The machine that has been equipped with transmission system that was designed to work in difficult conditions will meet your expectations properly even in the hardest conditions. Free independent rotor that consists of two parts is made of special steel. Blades’ shape cause centrifugal force, this provides fixing position to wings during operation so the best harvesting is obtained even in the hardest harvesting conditions. If the blades expose to any stone or similar high resistance, it will act to prevent damage. Telescopic wheels assist the machine to forward in the wet ground without sinking. Rotor placed on the machine manufactured from special kind of steel. Equipped with swinging, independently moving cutter knives which are composed of 2 parts. The moving parts are fixed free from one another. This makes it easy to change the worn part. The big difference with the other machines, Chopper is not a drawable harvester. Chopper is connected to tractor with 3 point suspension. This provides maximum flexibility with easy use and transport under the land and road conditions. Gear box with oil tank is designed for hard conditions, equipped with transmission and safety systems. Gear box furnished with gears manufactured by high quality materials. In 2004 as a result of research & development process, machine adapted 3 point suspension system after some changes by regarding the usefulness of 3 point suspension system which is much more useful than draw type system for the forage harvester machines. The main criteria while developing Chopper as CELIKEL is to increase the cutting speed and have perfect cutting even under the hard conditions. For this, CELIKEL used multi drive gear and belt pulley system. Due to this system; blowing capacity multiplied 1,5 times with the 1350 rpm. Swinging cutters do better, perfect cutting as a result of increased turning speed. Rotor – binder – cutter - moving parts suspension system causing centrifugal force enables the binder to stay stable and have the best cutting even under the hardest harvest conditions. In case of exposure for high resistance, binders and cutters move for preventing damage. 21 swinging cutter knives working by centrifugal force move the plants on land by smashing them accurately. Chopper is a harvester based on flail chop principle which cuts all kinds of green and dry plants by smashing. Flail chop is a cutting technique which is based on using the centrifugal force while turning 360° around the spindle of swinging cutters and stable cutters fixed against them to smash the plants. Flail chop technique is one of the most practical and common cutting techniques used for a long time all over the world. Machine’s independent hydraulic system, chute and cap are completed by hydraulic controllers. These controllers are a leading step to ease the harvesting operation. Not to lose the nutrition values, rotor turning speed decreased for not crash beet heads, as a result quality silage gained. Chopper can pick up clearly and exactly all kinds of products on the land such as alfa alfa. Forage harvester is able to work properly on wet ground. Strong telescopic suspension system works under all bad conditions taking power from machine’s three-point suspension system.