Building the Michalak AF4 Grande Skiff 23 | Epoxy-Coating the Interior and Primer Prep
I'm building this simple 21' flat-bottomed skiff, designed by Jim Michalak. In Episode 23, I epoxy coat the interior of the hull two times, then sand it and get the interior ready for high-build primer. Episode 23: Work between March 16 - April 7, 2026 Project total to date: 227.25 hours This is a personal project. All related videos are in a playlist: • AF4 Grande Build https://lackeysailing.com
▶︎
Building the Michalak AF4 Grande Skiff 24 | Painting the Interior
▶︎
Building the Michalak AF4 Grande Skiff 25 | Layout for the Ports
▶︎
I wanted the Flying Dutchman so here’s my start
▶︎
Building the Michalak AF4 Grande Skiff 27 | Deck Trim and Primer Prep
▶︎
Fibreglassing Made Simple - with WEST SYSTEM Epoxy
▶︎
Finally Joined the Hull… And Found a BIG Problem | EP2
▶︎
Building the Michalak AF4 Grande Skiff 29 | Nonskid, Loading the Boat on the Trailer, and Stuff
▶︎
Building the Michalak AF4 Grande Skiff 34 | Outboard well, Garboard Drain, Hardware, and Varnish
▶︎
Wooden BoatBuilding with Centuries of Tradition in Iran
▶︎
Building the Michalak AF4 Grande Skiff 26 | Installing the Decks
▶︎
The Peel Ply Mistakes I Made So You Don't Have To
▶︎
Does Injecting EPOXY actually FIX a rotten boat deck?!
▶︎
Does This Change The Way We Can Build Wooden Boats? | Building Temptress Ep21
▶︎
Building the Michalak AF4 Grande Skiff 31 | Installing Ports; Trim and Finish Work; Canvas Prep Work
▶︎
DIY Outboard Bracket Build
▶︎
Building the Michalak AF4 Grande Skiff 33 | Steering, Electrical, and Engine Connections
▶︎
Vacuum Bagging Wooden Boat Planking | Building Temptress Ep43
▶︎
How to Build a Budget-Friendly River Boat Yourself
▶︎
Building the Michalak AF4 Grande Skiff 28 | Priming and Painting the Hull and Deck
▶︎