Fixing Cooling Issues On A Small Outboard Motor
After long periods of full-throttle my Yamaha 2,5 HP would overheat so I decided to take it apart and check out what is wrong. After taking off the lower section I found that the impeller housing was full of molten plastic. after removing the molten plastic I put the motor back together. After using a drill to poke through the little telltale hole the cooling system was back to working like a charm
▶︎
Outboard cooling water
▶︎
Part 2, Mariner 4hp 2 stroke. Overheating issues fixed.
▶︎
No water from outboard tell-tale
▶︎
Top 10 Most Common Outboard Problems (and how to fix them)
▶︎
Changing Yamaha 4hp outboard impeller ( year 2000 )
▶︎
Outboard overheating - I've tried everything...
▶︎
Yamaha 8hp Outboard Small Engine Carburetor Repair Cleaning Ethanol Gas 😀👍🏼 2 Stroke
▶︎
Check the cooling system on the boat engine / Service on the outboard motor - Boat Refit #10
▶︎
Outboard Won't Pee? DO THIS!
▶︎
Outboard Water Pump Impeller Replacement YAMAHA F2.5 4-Stroke "How To"
▶︎
How to Replace the Impeller on a Yamaha Outboard engine
▶︎
Testing an outboard water pump
▶︎
2-Stroke vs 4-Stroke Outboards: Which One Would I Buy Today? (The Scanner Revealed Something)
▶︎
How to Fix any 2 Stroke Outboard (This is Everything I Know)
▶︎
Diagnosis and repair of 4 Stroke Outboard motor Carburetors. A look at the common issues.
▶︎
How This Insane Outboard Changed Boating Forever
▶︎
Mercury/Tohatsu Outboard Water Pump Impeller Change on a 4HP/5HP/6HP 4-Stroke
▶︎
1986 Mariner 5HP Outboard Impeller Change and Cooling Issues - Voyage Dreams 87
▶︎
Yamaha 4hp low idle tip
▶︎