Powder coating with Nordic Pulver NP-11 Powder Coating Gun System || Pulverbeschichtung

EN: A complete process of powder coating while using NordicPulver NP-11 powder coating gun. DE: Ein vollständiger Prozess der Pulverbeschichtung während der Verwendung der Pulverbeschichtungspistole NordicPulver NP-11. Nordic Pulver NP-11 powder coating gun that is available at our webshop: https://nordicpulver.dk/ Find us on Ebay: USA, INTERNATIONAL https://www.ebay.com/usr/balticmechan... UK, EUROPE https://www.ebay.co.uk/usr/balticmech... DE, EUROPE https://www.ebay.de/usr/balticmechani... Powder coat at Home! This video explains the process of powder coating Process for powder coating with Nordic Pulver NP-11 Powder coating gun system: 1. Assemble the powder coating gun 2. Connect the plug into a socket 3. Set an air pressure at 0.7 bar/ 10 psi 4. Connect an air compressor to the gun 5. Fill the container with a powder paint. Screw the container to the gun 6. Connect the crocodile clip to a workpiece 7. Spray an opaque layer of powder paint onto a workpiece 8.Remove the crocodile clip. Spray a powder paint over its past location 9. Heat an oven to 180 °C/ 360 °F 10. Put a workpiece into an oven 11. Turn off and open an oven after 20 minutes. Let a workpiece to reach a room temperature 12. Use an air blow gun to clean the powder coating gun #powdercoating #powdercoat #nordicpulver