👉 Reparé una batería de 36V que no cargaba | Celda muerta y balanceo con EnerKey

🔋 Professional Repair of a 36V Lithium Battery | ElectroQuantum EPR In this video, I'll show you a real repair of a 36V lithium battery that wasn't fully charging and wasn't reaching its nominal voltage. 🔎 The problem: The battery was only reading 35V even when "charged," when it should have been reaching 41V. After a step-by-step diagnosis, I discovered that one of the cells was completely dead (0V), which was causing the BMS to shut down and the pack to become unbalanced. ⚙️ Process shown in the video: ✔️ Initial full charge and voltage measurement ✔️ Individual cell measurement ✔️ Detection of damaged cell ✔️ Replacement with a cell of equivalent characteristics ✔️ Correction of voltage imbalance ✔️ Charging cell by cell with a digital power supply ✔️ Professional balancing using EnerKey ✔️ Final test with original charger ✅ Final result: The battery reached 41V again, charged to 100%, and is now fully operational. This video is ideal if you want to learn: 🔹 How to diagnose lithium battery failures 🔹 How to detect a damaged cell 🔹 What to do when the BMS cuts out due to imbalance 🔹 How to properly balance a battery pack 🔔 Subscribe to ElectroQuantum EPR for more videos on: 🔋 Lithium battery repair ⚡ Applied electronics 🛠️ Diagnostics and real-world solutions 💬 Let me know in the comments if you'd like me to make a video specifically about battery balancing or using the EnerKey.