Brass hammer build

Hello again, This time I build a brass hammer with a walnut handle. First I start off with a piece of 25mm brass bar which I cut down to 72mm long. I then square off the faces and mark out the hole for the handle. From there I cut the handle blank from a piece of walnut. Following that I shape the handle and drill out the hole on the hammer head to receive the handle. I then fit the handle to the head and finish the handle with boiled linseed oil and clean up the brass. Hopefully this shows you that on limit time and/or money you can make something useful. A massive thank you to my subscribers it means a lot. DISCORD   / discord   See you again soon.