Tu estación de energía se ha quedado a 0 y no recarga en la red, qui avería superada | Genergy

Has your Genergy station completely discharged and is now not recharging from the mains? Is error code E02 appearing? Don't send it to a service center just yet. In this 11-minute video, I'll show you how to revive it yourself with simple materials. Why does this error occur? If you leave the station completely discharged (absolute zero) and store it without immediately recharging it, the battery enters a deep protection mode. When you connect it to the mains, it won't respond and will display E02. What's the solution? The only way to "wake it up" is with direct current (DC). You need a source of at least 15V. This could be: Solar panels (but not everyone has them). A variable power supply. What I'm showing here: two 12V car batteries in series (24V). In this video you will learn: 🔹 How to connect two 12V batteries in series to obtain 24V. 🔹 How to apply this DC current to your Genergy charging station to wake it up. 🔹 How, once reactivated, to switch to normal AC charging (mains). 🔹 All without needing to send the unit to our technical service. ⚠️ Precautions: Make sure the car batteries are in good condition. Do not reverse the polarities (+ and -). Materials needed: 2 x 12V car batteries (in series), jumper cables or alligator clips, and a few minutes of your time. 📦 Do you need the technical specifications for your charging station? 👉 genergy.es 🎥 Studio Recorded – Edited by Mr. Fran ❌ Never Stop Learning #ErrorE02 #Genergy #PowerStation #BatteryRecovery #DIY #NeverStopLearning