Mastering your FT-dx10 with WSJT-x for FT8/FT4

In this video I'll be showing how to integrate your FT-dx10 with the WSJT-x suite of digital modes, especially FT8 and FT4 Download Links: WSJT-x: https://wsjt.sourceforge.io/wsjtx.html Dimension 4: http://www.thinkman.com/dimension4/do... Yaesu Drivers: https://tinyurl.com/2fwuny8d (Select Files Tab) Chapters: 01:16 Software and Driver Downloads 04:21 FT-dx10 Radio Settings 10:47 WSJT-x Settings 14:00 Operation Overview and FT8/FT4 Demo Radio Setup (Rig) Operation Setting (Preset deselected) OPERATION Setting/General 232C Rate: 9600 232 Time Out Timer: 100 ms CAT RATE: 9600bps CAT TOT: 100 ms CAT RTS: On RADIO Setting/MODE PSK/DATA DATA SHIFT (SSB): 1500 Hz LCUT FREQ: OFF HCUT FREQ: OFF DATA OUT LEVEL: 50 TX BPF SEL: 300-2700Hz DATA MOD SOURCE: REAR REAR SELECT: USB RPORT GAIN: 15 RPTT: DAKY PRESET (DATA-U MODE) CAT RTS: ON CAT RATE: 9600 bps CAT TOT: 100 ms LCUT FREQ: OFF HCUT FREQ: OFF TX BPF: 300-2700Hz RPORT GAIN: 15 RPTT: RTS WSJT-x Settings General tab My Call: Your Call My Grid: Your Grid IARU Region: ALL Display (Select) Blank line between decoding periods Display distance in miles (unchecked = Kilometers) Tx messages to Rx Frequency window Show DXCC, Grid, and worked-before status Behavior (Select) Double-click on call sets Tx enable Calling CQ forces Call 1st Tx watchdog: 6 minutes Periodic CW ID Interval: 0 Radio Tab Rig: Yaesu FTDX-10 Poll Interval: 1s CAT Control Serial Port: use enhanced port from device driver verify Baud Rate: 9600 – or… Data Bits/Stop Bits/Handshake: Default PTT Method: CAT Mode: Data/Pkt Split Operation: None Test CAT: Green Test PTT: Red and radio goes to TX mode Audio Tab Soundcard: Input: Line (USB AUDIO CODEC) (may have a number in front) Output: Speakers (same as above) Thanks for viewing. Please remember to Like, Share, and Comment. Also, please consider subscribing to this channel. 73 de Tom, ND3N