RX100 Chamber Silencer Installation | Step-by-Step Guide + Tips & Tools 🛠️🔥

Welcome back to the channel, legends! 🔥 In this video, I’ll walk you through the installation of a chamber silencer on my Yamaha RX100, step by step. This silencer was purchased from South India, priced between ₹4,000 to ₹6,000, and it was provided by me ( @speedylio ). 🚧 DISCLAIMER: This video is for educational and informational purposes only. Perform modifications at your own risk. ⚙️ Tools Used in This Installation: 🔧 Ring Spanner Set (for tightening nuts) 🔩 Allen Key Set (only if Allen bolts are used) 🧰 Standard Spanner or T-Handle Wrench (if stock bolts are used) 🪛 Universal Bolt Remover or Socket Wrench Set (if bolts are jammed or rusted) 🛠️ Precautions to Take: Let the bike cool down before starting the installation. Make sure the engine is off and the ignition key is removed. Use the right-sized tools to avoid damaging the bolts. Check for proper alignment of the chamber pipe before tightening fully. Apply anti-seize grease if necessary to prevent rust in the future. 📽️ Steps Followed in the Video: Removing the stock silencer from RX100. Aligning the chamber pipe to the exhaust port. Tightening bolts securely using ring spanner/Allen key. Final fitting and sound check. 💥 Don’t forget to LIKE 👍, SHARE 🔁, and SUBSCRIBE 🔔 for more RX100 mods, vlogs, and restoration projects! 🎶 Music Credits: Song: Indigo Artist: Kia Music by: CreatorMix.com Song: Yamaha Artist: Kia Music by: CreatorMix.com 📩 Business Enquiries: [email protected] 💥Follow me on social media for more updates: 📸 Instagram:   / ig__abhii__   🎥 YouTube: ‪@abhiscenes‬ 🧰 Facebook:   / abhishek.swain.758