A wood one piece garage door

This video is about 1pc Wood Door built from scratch start to finish to show you how much effort and work goes into a project like this. Materials used... *2-2x4x16's top and bottom rails cut to 15'11" *11-2x3x8 stringers cut to 6'9" *Frame nailed with 20p Galv nails *4 sheets of 4x8 3/8 rs ply with another two sheets ripped for design. *1 tube of white painters caulking, used to seal all seams from water soaking in behind the design and rotting out the ply...which is what happened to the old door. *Grey bottom seal, we were gonna seal the sides as well but changed our minds. TOOLS *Worm drive saw *Chop saw *Router *Staple gun and 1 1/4 inch staples *Hammer...22oz Estwing (no waffle head) *6-16p nails three on each end *E-900 Hardware *2-Holmes 528 springs 1 on each side *2 Holmes 728 springs 1 on each side *2 truss rods borrowed from customers old door seeing as they are tough to come by these days...1 top and 1 bottom *2-loyal employees to do the heavy lifting! All-Pro does not do painting so she had it painted by a professional painter. Music by Footage Firm Air Raid-Lic#5009-144-110512 Crowning Glory-Lic#50017-152-110512