Honda XL500s Mini Buggy Build || Part 1

Oh boy, here we go. Rolling out of the garage next is a home-built mini off road dune buggy, powered by a 1981 Honda XL500s engine. This project is another collaboration with Lincoln from Flaming Rayz, who is also building an off road dune buggy as per the rules we've made. 🚨WILDFOX FABRICATION MERCH🚨 wildfoxfabrication.com Rule sheet: https://docs.google.com/document/d/1b... Lincoln's channel:    / @rayzrebuilds   go subscribe or Thomas the Thermonuclear Bomb will be in your bed tonight Specifications of what happened in this video: I started construction of the bottom part of the frame using scrap 1" mild steel pipe, and used amazon pillow blocks and an old go kart axle as the rear swingarm pivot point. The rear axle was constructed using a @ 1" go kart axle, 44" in length. I then used a scrap go kart sprocket and ground the teeth off of it to use as a brake disk. I also used my school's waterjet cutter to cut out a sprocket hub out of 3/16" mild steel. Links to all the parts I used: 44" axle: https://www.gopowersports.com/axle-44... Wheel hubs: https://www.gopowersports.com/5-5-liv... The little hub thing I welded the sprocket hub onto that goes onto a 1" shaft: https://www.gopowersports.com/1-bore-... Pillow block bearings: https://www.amazon.com/Jeremywell-UCP... Filmed on the Panasonic Lumix FZ1000 with the Feiyutech AK2000s gimbal and the Takstar SGC-598 mic and edited in Apple Final Cut Pro .ps um sobscrib pls