Home Made Jet Unit 3D Printed 60mm
A simple jet pump to 3d print 60mm impeller , get the m8x1.25 threaded rod from a hardware store and some bearings off https://dkthewelder.com/ and 3 m8 nuts print it using about 250g of PLA or another filament of your choosing. Then it is ready to go! Get the printable files here at CG trader https://www.cgtrader.com/3d-print-mod... My CG Trader Page https://www.cgtrader.com/dkthewelder?... Follow me on Facebook to enter the give away to get one of 10 free file packs mentioned in the video / dkthewelder
▶︎
Jet impeller on a lathe - how is this possible ???
▶︎
How to Make an Electric Surfboard with 3D Printed Jet Drives
▶︎
Will My 3D Printed Jet Engine Explode at Full Speed - DIY Turbojet with 3D Printed
▶︎
I Built the World's Biggest Hydrofoil Board
▶︎
3D Printing & Assembling a Compact Waterjet for Surfboards
▶︎
build your own water jet unit from PVC pipe and fiberglass
▶︎
Homemade Jet Drive 3D Printed
▶︎
I 3D Printed a Kayak in Less Than 24 hours
▶︎
No one believes it but it really works! Turn a Lawnmower into a Boat Jet Engine with PVC Jet System
▶︎
3D Printed Hydrofoil Surfboard - Will it Work?
▶︎
Perfect restoration of the jet set over the boat
▶︎
3D Printed Water Jet with 4 POWERFUL INDEPENDENT NOZZLES
▶︎
WATERJETS: When to Use, Pros, and Cons
▶︎
Jet Pump Kawasaki 650sx Jet Ski Restoration
▶︎
DIY HOW TO POWER A KAYAK WITH A BILGE PUMP/MOTOR!
▶︎
Water Jet Thruster For DIY RC Boat
▶︎
This is how I built a 3D printed waterjet engine for my beloved boat
▶︎
Bạn sẽ không thể tin được việc Chế Tạo Một Động Cơ Turbojet lại khó đến mức này
▶︎
Building a 3D Printed Carbon Fiber Micro Catamaran
▶︎