HOW TO install a fuel screw on a DRZ400.
This is a how to video on how to install a fuel screw on a DRZ400. If your carburetor has not had any adjustments then you'll likely need to remove the brass plug that is covering the stock fuel screw. To do that, you drill a small hole into the plug (don't go too deep!) and then thread a screw into it so it will push the plug out. There are directions online on how to do that. If you don't know what you're doing, DO NOT CHANGE ANYTHING ON YOUR CARB. My bike has a JD Jet kit already installed with the proper jetting so I know what the fuel screw needs adjusted to.
▶︎
DRZ Manual Petcock // Installation Video
▶︎
$50 MOTORCYCLE UPGRADES! #drz400s #suzuki #dualsport
▶︎
The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor
▶︎
DRZ400 Full Service Oil Change
▶︎
Finally a Seat Concepts Seat for the DRZ4S!
▶︎
DRZ400SM Petcock Fix! (Don’t Get Stranded!)
▶︎
Installing a LECTRON Billetron Pro Carb to my DRZ400E
▶︎
DRZ400 Free Power Mod
▶︎
How to Change the clutch cable on a DRZ400
![How To Tell If Pilot Jet Is Rich or Lean [Jetting Symptoms]](https://i.ytimg.com/vi/dzFzWIZsuDg/hqdefault.jpg?sqp=-oaymwEjCNACELwBSFryq4qpAxUIARUAAAAAGAElAADIQj0AgKJDeAE=&rs=AOn4CLBcRmpPCqu4KG3KAvlD9zpy2BI_sA)
▶︎
How To Tell If Pilot Jet Is Rich or Lean [Jetting Symptoms]
▶︎
DRZ400 Water Pump Rebuild + Coolant Leak Fix
▶︎
Installing A DRZ400 E Model Petcock On A DRZ400SM!
▶︎
How To install a Polini Variator on a Yamaha C3 Scooter
▶︎
DRZ400 gearing selection for the curious
▶︎
3 Ways To Delete Kickstand Kill Switch on DRZ400
▶︎
How To:- Easiest Way Suzuki DRZ400 Full Scheduled Service Step by Step & Hidden Frame Filter Screen
▶︎
DRZ400SM LECTRON BILLETRON PRO Carb Install!
▶︎
Must have mods for the DRZ400 | On Two Wheels
▶︎
DRZ400s Mods and Upgrades
▶︎