Knuckle alignment setup on a Landcruiser Hub - 40, 55, 60 and 70 series

Setup up your shim thickness on your classic Landcruiser can be tricky, but I show to make it easier this will work on the following models. Toyota Landcruiser 40, 55, 60 and 70 series. https://www.allfourx4.com.au/ https://www.terraintamer.com/ https://www.chemtools.com.au/ Knuckle alignment tool brought from - https://www.4x4offroadclinic.com.au/ ‪@AllFourX4Spares‬ ‪@chemtools-australia‬ ‪@TerrainTamer4WD‬ #40series #60series #70series #knuckles #hub #4x4 #toyota #landcruiser #terraintamer #allfourx4 00:00 - Introduction & The Terrain Tamer Swivel Hub Rebuild Kit 01:21 - Why Knuckle Alignment Matters (Shim Height) 03:06 - Prepping and Packing the Knuckle Bearings 03:58 - Setting the Initial Preload (Scale Measurements) 05:05 - Measuring and Tracking the Hub Faces 05:46 - Using the Knuckle Alignment Scribe Tool 07:49 - Working Out the Upper and Lower Shim Math 08:32 - Installing Inner Lip Seals & Swivel Hub Seals 09:47 - Installing the New Shims and Torquing Cone Washers 10:45 - Spindle Hub Assembly & New Brake Hoses 11:23 - Prepping the Hub Rotor and Bearing Races 12:47 - Assembling the New Hub & Dialing In Wheel Bearing Preload 14:08 - Fine-Tuning Final Bearing Clearance with the Scale 15:53 - Locking Tabs, Free-Wheeling Hubs, and Calipers 17:01 - Filling the Diff and Final Review of the Kit