Table Saw Sleds with Acrylic / DIY

3D Modeling Blueprint :    • Table Saw Sleds with Acrylic / 3D Modeling...   After using Bosch's portable table saw, GTS 10XC, I finally used the table saw of the casting body. It feels like I've replaced my previous compact car with a large sedan. I like it even though it's not a slide table saw. Actually, sliding products seem to be too expensive. The saw machine is thousands of dollars. I work a lot on making idea products with small materials, so I thought small size was enough, but when I saw the new product, I wondered how I had worked so far. I was so happy that I decided to apply new systems to the table saw. There must be a reason for everything I've done so far, but I wanted to put that aside and try new things. The first is the upper dust collection system made of transparent acrylic. The purpose was to minimize fine dust flying toward the worker's face, and to make it transparent to secure a view. You can check this process in other videos.    • Table saw Upgrade #1 : Holder / DIY   The second one is the table saw sled. This is an item that 99% of table saws make and use by themselves. It is a necessary aid to safely cut small components. I made it with transparent acrylic. There are many advantages. First of all, it's transparent, so you can see the blade of the table saw very clearly. It means that you can work more comfortably and safely. And because of the nature of the material, it is less sensitive to changes in moisture and temperature than wood. There is little deformation through contraction or expansion. This also increases accuracy. The lower rail also uses metal, so there is little clearance. Some of you might be worried that the dust will stick to you because of static electricity, as you can see from the video, the dust on the wood hardly sticks. There is a smooth double-sided tape attached to the bottom, so there is no static electricity when moving. The metal plate on the floor also holds static electricity. Although it weighs about 20% more than trees of the same size, the sled shows more stable movement. It's not hard to do a round trip at all. Please refer to the production process and I hope more people make it and use it. It's a gift for everyone in the world who loves DIY and woodworking. Thank you. #DIY #TableSawSled #TableSaw #Acrylic #Woodworking #Making