Installing a new RADIATOR on the 100 series Land Cruiser

With 220k miles on the original radiator, it was starting to show signs of weakness. I hope this video helps others tackle this project too - although a slightly more involved install, I'd say its very doable with moderate skill. Not all of the parts below are required to replace the radiator - in particular, the Fan Clutch, Fan Blade, and Fan Shroud can be skipped. Part numbers for my 2006 Land Cruiser 16400-50290 | Radiator Assembly | $523.08 1657150150 | HOSE, RADIATOR, NO.1 | $13.52 1657250150 | HOSE, RADIATOR, NO.2 | $19.14 1634650010 | GASKET, THERMOSTAT | $2.87 9091603100 | THERMOSTAT | $14.66 9046641008 | CLAMP OR CLIP(FOR WATER HOSE) | $3.59 9046743002 | CLAMP OR CLIP, HOSE(FOR RADIATOR INLET) | $3.55 1658466010 | BUSH, RADIATOR SUPPORT, NO.2 | $2.77 1654950010 | COLLAR, RADIATOR SUPPORT, NO.2 | $5.08 11658461020 | INSULATOR, RADIATOR MOUNTING | $9.70 1654961010 | COLLAR, RADIATOR SUPPORT, NO.2 | $2.96 *Not strictly needed for replacing the radiator - I replaced these as PM 1632150020 | INLET, WATER | $25.18 16210-50102 | Engine Cooling Fan Clutch | $106.65 16361-50170 | Fan Blade | $143.70 16711-50090 | Engine Cooling Fan Shroud | $111.41 1647050100 | TANK ASSY, RADIATOR RESERVE | $52.41 Chapters 00:00 - Intro 00:12 - Disconnect battery 00:21 - Remove engine cover 00:29 - Remove engine under cover 00:35 - Remove airbox 01:12 - Drain radiator coolant 01:49 - Drain engine block coolant 02:26 - Passenger side 03:03 - Fan shroud 04:34 - Fan fluid coupling 04:51 - Drive belt 05:16 - Oil cooler hoses 05:57 - Radiator hose #1 06:32 - Thermostat 07:41 - Radiator hose #2 07:55 - Remove radiator 08 :37 - Install new radiator 08:58 - Slide it into place 09:40 - Radiator nuts/bolts 10:15 - Oil cooler hoses 10:22 - Radiator hose #1 10:41 - Fan shroud/fan 11:30 - Radiator hose #2 11:40 - Resevoir 11:51 - Fluid coupling 12:06 - Coolant refill 13:36 - Test drive 13:47 - Outro