VTX с пульта через IRC Tramp — настройка в Betaflight

In this video, we'll explore remote control of a video transmitter via IRC Tramp and show how to change VTX parameters directly from the remote control without physical access to the module. IRC Tramp allows the flight controller to send commands to the video transmitter, including switching channel, frequency, and power, provided the VTX correctly supports this protocol. What's in this release: How VTX control via IRC Tramp works How to configure channel and power switching via AUX How this is displayed in Betaflight and the CLI Why full IRC Tramp support on the VTX is important The main goal of this setup is to achieve predictable control of the video transmitter directly from the remote control. If everything is connected correctly, the VTX will reliably respond to commands. If the setup is incorrect or the protocol is not fully supported, the channel and power may not switch. Important: for proper operation, a VTX with full IRC Tramp support is required. ======================================== Check out our products: https://beastfpv.ru Follow us on Telegram: https://t.me/beastfpvru ========================================= If you're interested in setting up VTX, IRC Tramp, Betaflight, and FPV system control, let us know in the comments what technical points we'd like to cover in future videos. Subscribe to BEASTFPV - more practical breakdowns, tests, and engineering materials on FPV are coming. #FPV #BEASTFPV #VTX #IRCTramp #Betaflight #FPVdrones #videotransmitter #radiocommunication #drone #UAV #FPVsetup #FPVsetup