PS4 Scuf selbst bauen V1 | OHNE LÖTEN | Controller Mod |

I'm sorry the microphone sometimes crackles. I hope it's not too bothersome. By purchasing this set, you'll be supporting the channel. Set for older controllers: https://www.bitro.de/product/ps4-v1-r... Set for newer controllers: https://www.bitro.de/product/ps4-v3-r... Video: Modifying V2 Controllers:    • PS4 Scuf selber bauen + Paddles anbringen ...   If you have any questions, problems, criticism, or video suggestions, please feel free to leave them in the comments. ... Instagram:   / bitro.gaming   Here's how to do it: 1. Open the PlayStation controller 2. Disconnect the flex cable and battery 3. Unscrew the screw in the center of the main board 4. Remove the main board (the 2-4 clips need to be released) 5. Cut off the PS4 remapper arms or bridge 5.1. Glue the remapper to the main board 6. Reinstall the main board 7. Reinstall the main board screw and the battery 8. Attach the Scuf paddle to the underside with tape and mark the holes 9. Drill holes for the paddles and mapper buttons 10. Glue the buttons in place with a hot glue gun 11. Reconnect the flex cable from the underside 12. Close the controller 13. Attach the paddle Your modified Scuf controller is now complete.