Surface Mastery Part 8 - Building Surfaces with 3D Splines | How to Surface Edges and 3D Splines

In this video we are going to build out the lower portion of our Ferrari 308 Fender using only 3D Splines to fill in the gaps. This process can be tricky to control but we will walk through the process and its weak points to prepare you to model your own parts. If you want to follow along you can download the dataset here: https://a360.co/3jkLKEx

Join Today
Surface Mastery Part 9 - Patching a Surface using Interior Guide Rails | LOFT VS PATCH VS LOFT...
▶︎

Surface Mastery Part 9 - Patching a Surface using Interior Guide Rails | LOFT VS PATCH VS LOFT...

Surface Mastery Part 7 - Blending Multiple Surfaces with 3D Splines, Lofts and Patches | How To
▶︎

Surface Mastery Part 7 - Blending Multiple Surfaces with 3D Splines, Lofts and Patches | How To

How to Model an Architectural Möbius Strip in Rhino 3D [PART 1: Twist Tool & Flow Along Curve]
▶︎

How to Model an Architectural Möbius Strip in Rhino 3D [PART 1: Twist Tool & Flow Along Curve]

Surface Mastery Part 1 - Loft Vs Patch for Blended Edges | How to Identify a Good vs Bad Surface
▶︎

Surface Mastery Part 1 - Loft Vs Patch for Blended Edges | How to Identify a Good vs Bad Surface

Smoother Transitions To Flat Surfaces in Fusion 360
▶︎

Smoother Transitions To Flat Surfaces in Fusion 360

Casual Live Automotive Modelling in Plasticity Without References
▶︎

Casual Live Automotive Modelling in Plasticity Without References

Surface Mastery Part 6 - How To Create 3D Projected Curves for Complex Surfaces #cardesign
▶︎

Surface Mastery Part 6 - How To Create 3D Projected Curves for Complex Surfaces #cardesign

Fusion Surfacing Practice | Modeling a Polygonal Tray 3 Different Ways
▶︎

Fusion Surfacing Practice | Modeling a Polygonal Tray 3 Different Ways

3D Printed WIDEBODY Kit - Design and Software Used
▶︎

3D Printed WIDEBODY Kit - Design and Software Used

Practical CAD Techniques for Composite Pattern/Mould Design
▶︎

Practical CAD Techniques for Composite Pattern/Mould Design

Surface Mastery Part 15 | Creating an Intake Vent with Surfacing #fusion360
▶︎

Surface Mastery Part 15 | Creating an Intake Vent with Surfacing #fusion360

Surface Mastery Part 16 - How To Create A Complex Handle With Fading Details #fusion360
▶︎

Surface Mastery Part 16 - How To Create A Complex Handle With Fading Details #fusion360

HOMILÍA DE HOY | DIOS AYÚDAME A CONFIAR AUNQUE NO ENTIENDA NADA | PADRE FREDDY BUSTAMANTE
▶︎

HOMILÍA DE HOY | DIOS AYÚDAME A CONFIAR AUNQUE NO ENTIENDA NADA | PADRE FREDDY BUSTAMANTE

Macgregor: Neue Welt – Israel stirbt, NATO tot & USA von Iran besiegt
▶︎

Macgregor: Neue Welt – Israel stirbt, NATO tot & USA von Iran besiegt

Surface Mastery Part 3 - Ruled vs Extend Surface | What is the different and when to use them?
▶︎

Surface Mastery Part 3 - Ruled vs Extend Surface | What is the different and when to use them?

Fusion 360 Surface Modeling Tutorial - Core Concepts Explained
▶︎

Fusion 360 Surface Modeling Tutorial - Core Concepts Explained

Topology With T-Splines In Fusion 360
▶︎

Topology With T-Splines In Fusion 360

Surface Modeling with Fusion 360
▶︎

Surface Modeling with Fusion 360

Surface Mastery Part 10 - How To Preserve Shapes When Patching Surfaces | How To Use Loft and Patch
▶︎

Surface Mastery Part 10 - How To Preserve Shapes When Patching Surfaces | How To Use Loft and Patch

Designing a 3D Printed Center Console From Scratch
▶︎

Designing a 3D Printed Center Console From Scratch