Abgaskrümmer aufwerten - Krümmer überholen - neu lackieren planschleifen - Oldtimer Restauration

In this video I am overhauling the exhaust manifold on the Mercedes M117 V8 engine. After dismantling, I brush the elbows with wire brushes to remove loose dirt particles and rust, then I remove the old remains of the sealing inserts and grind the transitions flat. Degrease and clean with silicone remover, then paint. Content: 00:00 introduction 01:58 brush off the manifold 03:14 surface grinding 05:35 degrease with silicone remover 07:09 painting Thermal spray paints in the high temperature range: VHT thermal lacquer 1093 degrees black matt: https://www.amazon.de/gp/product/B00S... Mipa up to 800 degrees silver matt https://www.amazon.de/gp/product/B002... VHT thermal paint up to 1093 degrees white matt https://www.amazon.de/gp/product/B00S... VHT thermal paint orange mat https://www.amazon.de/gp/product/B00S... VHT thermal lacquer 1093 degrees gray matt https://www.amazon.de/gp/product/B00S... VHT thermal lacquer 1093 degrees yellow matt https://www.amazon.de/gp/product/B00S... Presto silicone remover https://www.amazon.de/gp/product/B01N... Cameras: Canon EOS 250D https://www.amazon.de/gp/product/B07Q... GoPro Hero 7 silver https://www.amazon.de/gp/product/B07G... Leica V-Lux 30 Software: Filmora9 Working on vehicles requires special specialist knowledge. Always use an authorized workshop for repairs and maintenance. The articles shown here do not replace the specialist literature and serve as suggestions and information. No liability is accepted for damage of any kind! #mercedesbenz #oldtimer # r107