How to Replace Front Bumper Impact Absorber 1998-2011 Ford Ranger

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-cS This video shows you how to install a bumper impact absorber on your 1998-2011 Ford Ranger. This repair was done on a 2006 Ford Ranger XLT 4.0L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 1998 Ford Ranger 1999 Ford Ranger 2000 Ford Ranger 2001 Ford Ranger 2002 Ford Ranger 2003 Ford Ranger 2004 Ford Ranger 2005 Ford Ranger 2006 Ford Ranger 2007 Ford Ranger 2008 Ford Ranger 2009 Ford Ranger 2010 Ford Ranger 2011 Ford Ranger Tools you will need: • 10mm Socket • 18mm Socket • 8mm Socket • Trim Tool Set https://trq.video/oajX-1AXXX00006 • Side Cutters • 1/2 Inch Impact Gun • 3/8 Inch Impact Gun • Ratchet • Swivel • Torque Wrench https://trq.video/oaSE-1AXAA00044 • Gloves https://trq.video/oawy-1AXSS00048 • Safety Glasses • Floor Jack • Hammer • Jack Stands • Punch • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.