OVERHAUL SERIES # 6: Install New Oil Wick Felt in a Singer 99, Singer 66, or Singer 185!
BUY ME A COFFEE 👉 ☕️ https://buymeacoffee.com/vintagesewin...
▶︎
OVERHAUL SERIES #2: Get The Most Power From Your Machine By Cleaning Your Hand Wheel & Rubber Parts!
▶︎
SINGER 185 OVERHAUL SERIES #2: Installing a Shuttle Bracket, Adjusting Feed Dogs & Install Oil Wick!
▶︎
The Oscillating Rock Shaft Oil Wick of the Singer Model 15-91
▶︎
Singer 201 How to look after and maintain and use the Singer 201 correctly. 3. Deep Clean.
▶︎
SINGER 185 OVERHAUL SERIES #1: Clean Singer Shuttle & Race Areas & Maximize Your Machine’s Power!
▶︎
Singer 66 Hook: Remove, Replace, & Set Timing
▶︎
Fixing this Noisy Singer 221K Featherweight Vintage Sewing Machine
▶︎
Benchside Chat: Meredith's Singer 66, Part 1, The Bobbin Case Positioning Bracket
▶︎
1882 SINGER Sewing Machine Restoration. Working after 140 years!!!
▶︎
The Bobbin Area Parts of a Singer Model 99K Sewing Machine
▶︎
CLEANING SERIES #3: If You Have to Scrub Too Hard, That's Not Dirt You Are Removing. Dirt Vs Lacquer
▶︎
CLEANING SERIES #2: Testing Cleaning Techniques For Machine Hardware. Which is Most Effective??
▶︎
Troubleshooting a Stuck Singer 66
▶︎
How to adjust thread tension on a lock-stitch sewing machine
▶︎
What Are Your Feet For?: identifying vintage sewing machine foot types!
▶︎
CLEANING SERIES #5: Rust,Dirt or Both? The Machine Preserving Qualities of Old, Dried, Dirty Oil!
▶︎
Sewing Machine Grease Wicks - How and why I preload the grease...
▶︎
Singer 401A Service and Repair
▶︎
Restoring a Vintage Singer 66: Cleaning the Bobbin Area
▶︎