Kitchen Aid Dishwasher not washing well. Sump/Pump Change out. W10605057

Call us today with you model number and we will make sure you get the right part 888-655-8569 In most cases we can get you the part the next day if ordered before 4pm central time. --------------------------------------------------------------------------------------------------------------------------------------------------------------- Donations are appreciated as well you can donate here - https://www.paypal.me/Beardedappliance Here is the Sump assy featured in the video. If you need it just click the link below. KitchenAid W10605057 Whirlpool Dishwasher Pump and Motor Assembly https://amzn.to/2LATChO We changed out the sump pump assembly on this unit because the water was not being pushed through properly. The motor would run but it would just hum. There was nothing caught in the sump so there must be stuff stuck in the motor area. Replaced the sump pump and all is well. To replace this sump it can be pretty tricky. You need to drain the unit then take off the drain pump, turbidity sensor, and associated wiring. After that is done you can get the sump out. Swap over what needs to be swapped over to the new one than reinstall. After wards it should be washing great. If this video helps give me a like and subscribe. Thanks for watching. Disclaimer: I am a proud affiliate/sponsor of these products/services. All opinions and recommendations are honest and expressed with the good intent that you will find them of value. Purchasing through these links will not affect your check out process in any way, but it will support this channel and allow me to keep making valuable videos for you. Thank you for your trust.