ACHTUNG!! siehe Beschreibung #BEHRINGER günstige Lösung | Reicht das kleine Interface zum Messen?

ATTENTION: IN SOME CASES, THERE ARE PROBLEMS WITH IMPEDANCE MEASUREMENT WHEN USING THIS SOUND CARD. SINCE THIS BUG HAS NOT YET BEEN FIXED, PLEASE DO NOT BUY THIS INTERFACE AT THIS TIME: Modern laptops often come with sound cards that are unsuitable for measuring speakers. Whether it's poor frequency response or a lack of connectivity, many hobbyists need a dedicated "sound solution." With the UCA202, Behringer offers a simple, small USB sound card that offers sufficient performance in terms of the promised data and connectivity options. In this video, Frank takes a closer look at the device and shows how to set it up in REW. The sound card was neither provided nor paid for in this presentation. It was selected and purchased privately. Further information: Behringer sound card website: https://www.behringer.com/product.htm... REW measurement program: https://www.roomeqwizard.com/ All information is provided without guarantee – Would you like to support my channel or simply show appreciation for my work? Then I would be very happy if you could send me a small donation via PayPal. You can easily make me happy using the following link: https://www.paypal.com/paypalme/frank... Thank you very much. - Do you want to set up or upgrade your measurement lab or woodworking shop? I'm providing you with a few Amazon links here. These are affiliate links. I would be happy if you would order the respective products through them. Simply follow the links to your Amazon page. The price remains the same for you. Here you can find the equipment I use. MEASURING LABORATORY: The Monacor MPA-102 preamplifier for the measurement microphone: https://amzn.to/39XAh7b The SONARWORKS XREF20 measurement microphone itself: https://amzn.to/3gmVSH2 My DCX2496 digital crossover: https://amzn.to/3qEtkha The DCX2496LE light version (it's better to spend €30 more for the non-LE version): https://amzn.to/3mXAcnk ATTENTION: IN SOME CASES, THERE ARE PROBLEMS WITH IMPEDANCE MEASUREMENT WHEN USING THIS SOUND CARD. SINCE THIS BUG HAS NOT YET BEEN FIXED, PLEASE DO NOT BUY THIS INTERFACE AT THIS TIME: The UCA202 USB sound card from Behringer: https://amzn.to/3mVJfFj The UCA222 works just as well as a replacement: https://amzn.to/2VQFp4z WOODWORKSHOP In the woodshop, I can't manage without a biscuit joiner. I use the inexpensive solution from Einhell. https://amzn.to/3mrdIKG A pile of 20mm biscuit dowels comes in a practical case. You can never have enough of them. https://amzn.to/37rux3D Not exactly cheap, but worth the price is the GCM 8 SJL miter saw from Bosch. I cut wood for smaller speakers entirely on this saw. I won't let it go. https://amzn.to/3msHiPU For precise cuts, you need to adjust the saw angle. Unlike other products, this LevelBox has a real battery built in (AAA instead of CR2032) and doesn't require a new battery as often. A tool I wouldn't want to do without. https://amzn.to/2J143Nc Thank you if you order through it. The links were created to the best of my knowledge and belief. This is a display of my development without warranty or guarantee. It is only an example of how it could be built. Any reproduction is at your own risk. This applies to compliance with technical specifications, operational safety, and the success and sound of the reproduction. Any compensation for damages is excluded. I run the channel as a hobby. For this reason, please understand if I cannot provide additional advice or developments. Due to time constraints, I must decline such requests. For all other cases, please use my email address below. Contact info: [email protected]