Folding Guitar Stand // Woodworking How To (RE-UPLOAD) | I Like To Make Stuff

I made a folding guitar stand out of walnut and brass! Thanks to TOOLS & SUPPLIES: https://kit.co/iliketomakestuff/my-wo... https://kit.co/iliketomakestuff/shop-... In my old office, I had my guitars hanging on the wall. In the new house, I didn't want to lose that wall space so I wanted to make a guitar stand that was functional and portable. I started designing the stand in Illustrator so that I could get an idea of how big each piece needed to be.  The sizing and geometry is important because I wanted the stand to hit hard stops when it was unfolded without having to add any additional fasteners. Unlike most of my woodworking projects, I used the Illustrator template to make a prototype out of some scrap plywood. I was very happy that I did, because my geometry was all wrong and I would have wasted some expensive hardwood. After a few iterations I had a working model and transferred the new design to some pieces of walnut. I used brass hardware to contrast the dark wood and even had to make a custom latch out of a brass sheet. I used The Wood Whisperer Thread Taps to tap holes directly into the rotating legs so that I didn't need to use a nut on the outside. This choice helped keep a minimalistic look to the whole project and lets the beautiful walnut take center stage. I CA glued thin strips of EVA foam to the surfaces that would touch the guitar to prevent scratching and I finished the whole thing with two coats of Danish oil. This stand is sturdy and elegant enough to show off my favorite vintage guitars and will add a custom touch to my new music room! If you enjoyed this woodworking project, you'd love my others too. Subscribe: http://bit.ly/ILikeToMakestuffSubscribe Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos Learn 3d modeling, get digital plans, and cool merch at https://iliketomakestuff.com Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon FOLLOW:   / iliketomakestuff     / iliketomakestuff     / iltms   #ILikeToMakeStuff About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more! These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about! Folding Guitar Stand // Woodworking How To (RE-UPLOAD) | I Like To Make Stuff    • Folding Guitar Stand // Woodworking How To...   I Like To Make Stuff    / iliketomakestuff