Quinn's Quilted Shell Zipper Bag | Detailed Sewing Tutorial

Learn to sew your own Quinn's Quilted Shell Bag in this detailed sewing tutorial. If you have any questions along the way, you can direct message me on instagram (@torieandren) or comment below and I will try my best to answer as soon as possible. For pattern updates or corrections visit my instagram and check my story highlights. Instagram: @torieandren For written instructions visit: https://www.etsy.com/ca/shop/torieandren The completed bag sewn in this video will be posted to Etsy soon! If you're interested in purchasing it before then please send me a message to [email protected]. Templates can be found here: http://bit.ly/4almBzT The seam allowance for this project is ¼”. Seam allowance is indicated at each step. Finished Size: Approximately ≈ 5¾” × 7½” × 3½” Materials: Instructions are provided for double-sided and single-sided fusible foam, as well as sew-in foam. A temporary fabric adhesive, such as 505 Spray & Fix Fabric Adhesive, will be used to prepare single-sided and sew-in foam for quilting. Foam options include: ByAnnie Soft and Stable, Bosal In-R-Form, and Camelot Behind the Seams FoamPro. Please read the full instructions prior to selecting your foam. Directional fabric is not recommended for Prints B and C. Print B will be used for the exterior binding, while Print C is the lining and interior binding. If directional fabric is used, the print will be upside down or sideways in some locations. You may also require an erasable marking pen, hera marker, walking foot, seam guide, quilting clips or pins, rotary cutter, ruler or measuring tape, temporary fabric adhesive, and needles for hand sewing. Materials (Yardage) Print A (Quilting Cotton): Fat Eighth Print B (Quilting Cotton): Fat Quarter Print C (Quilting Cotton): Fat Quarter Fusible or Sew-In Foam: ½ yard based on a 20" width Continuous Nylon Zipper #5 or No. 5 or Size 5: ½ yard with 2 Zipper Pulls Cut to 17” Materials (Scraps) Print A (Quilting Cotton): (2) 8½” × 10” Print B (Quilting Cotton): (1) 9½” × 9½” Print C (Quilting Cotton): (1) 16½” × 10” and (2) 1½” × 4¾” Fusible or Sew-In Foam: (1) 16½” × 10” Continuous Nylon Zipper #5 or No. 5 or Size 5: 17" with 2 Zipper Pulls Cutting: Print A (Quilting Cotton) A (2) 8½” × 10” Print B (Quilting Cotton) C (1) 9½” × 9½” Print C (Quilting Cotton) E (1) 16½” × 10” D (2) 1½” × 4¾” Foam Stabilizer E (1) 16½” × 10” Materials used in this video: Fabric: Print A is Warm Wishes by Sarah Summers for Robert Kaufman Print B and C is Angels on High by Cathy Squire for Northcott Fabrics https://sewersclub.ca/products/angels... Stabilizer: Double-Sided Foam: Camelot Behind the Seams FoamPro D Hardware: Zipper Tape: #5 Nylon Zipper Tape, White Tape, Antique Coil https://sallietomato.com/collections/... Zipper Pulls: Antique Star Pulls by Zipper Valley https://www.zippervalley.com/collecti... I am affiliated with and have personal ties to Sewers Club and Owl Be Sewing, but do not make a commission off the products I recommend or share. My opinions are my own and I share products because I love them. I do get items at a discount unrelated to Torie and Ren videos and patterns. Thanks for stopping by, I hope you love this project just as much as I do. with love, torie and ren