We Love the Land Rover Discovery LR3 HSE LUX HD | best budget overlanding rig

walk around of our newest toy, the Land Rover 2009 LR3 v8 HSE Lux cameras: Samsung S25 pro video and DJI Osmo Action 4 no ND filter and terrible lighting settings....sorry. audio: DJI Osmo Action 4 internal mic editing software Capcut Pro Tires: cooper discoverer AT3-4S wheels: 20in turbine stle LR4 / Range Rover Sport wheels suspension: OEM Exhaust: OEM Headlights: OEM Fog Lights: OEM Doors: OEM 😆 future plans include, keeping it OEM. the Land Rover LR3 and the LR4, but specifically here in the L319 The LR3 features full independent suspension (FIS). Like the Range Rover L322, this is an air suspension system, enabling ride-height adjustment by simply pumping up or deflating the air bags. The vehicle can be raised to provide ground clearance when off-road, but lowered at high speeds to improve handling. Land Rover developed 'cross-linked' air suspension. When needed, the suspension mimics the action of a beam axle (as one wheel drops, the other rises). If the chassis of the vehicle contacts the ground when the suspension was at its 'off-road' height, the system senses the reduction in load on the air springs and raises the vehicle an extra inch. In the UK and European markets, a coil-spring independent suspension system was offered on the base model. This model was unique in the range by having only five seats and only being available with the 2.7-litre diesel engine. This model lacked the Terrain Response system. The engines used in the Discovery 3 were all taken from Land Rover's sister company at the time, Jaguar. A Ford/PSA-developed 2.7-litre, 195 hp (145 kW), 440 N⋅m (320 lb⋅ft) V6 diesel engine (the TdV6) was intended to be the biggest seller in Europe. For the US market and as the high-performance option elsewhere, a 4.4-litre petrol V8 of 300 hp (220 kW) was chosen. A 216 hp (161 kW) 4.0-litre SOHC Ford V6 petrol engine was available in North America and Australia. The gearboxes on the Discovery 3 were also all-new. For the diesel engine, a six-speed manual transmission was standard. As an option, and as standard on the V8 engine, a six-speed automatic transmission was available. Both came with a two-speed transfer box and permanent four-wheel-drive. A computer controlled progressively locking central differential ensured traction was retained in tough conditions. A similar differential was available on the rear axle to aid traction. The Discovery 3 was fitted with multiple electronic traction control systems. Hill Descent Control (HDC) prevented vehicle 'runaways' when descending steep gradients and 4-wheel Electronic Traction Control (4ETC) prevented wheel spin in low-traction conditions. An on-road system, Dynamic Stability Control (DSC), prevented skidding when steering and braking at speed. The vehicle also featured the 'Terrain Response' system. Previously, off-road driving had been a skill that many drivers found daunting. A wide-ranging knowledge of the vehicle was needed to be able to select the correct gear, transfer ratio, various differential systems and master various techniques required for tackling steep hills, deep water and other tough terrain. Terrain Response attempted to take away as many of the difficulties as possible. The driver selected a terrain type ("Sand", "Grass, Gravel & Snow", "Mud & Ruts" and "Rock Crawl") on a dial in the cab of the vehicle. The on-board computer systems then select the correct gearbox settings, adjust the suspension height, adjust the differential lock settings and even alter the throttle response of the engine suitable for the terrain. For example, in "Rock Crawl", the suspension is raised to its maximum height and set to allow maximum wheel articulation, the differentials are locked, the driver is prompted to switch to Low Range, and the throttle response is altered to provide low-speed control. In "Sand" mode, the traction control system is 'primed' to be more sensitive to wheelspin, the differentials are partly locked, and the throttle response is re-mapped to produce high power outputs with short pedal movement. The driver retained some manual control over the off-road systems, being able to select the Transfer Box ratio and the suspension height manually, although use of the Terrain Response system is needed to allow full use of the vehicles' capabilities. HSE in Land Rover stands for High Specification Equipment so, if you are looking for a similar LR product, be sure to look for an HSE and if possible, a LUX! overlanding trends that are a waste of money (lol) Why the LR3 is worth buying LR3 LR4 Interior