How to Disassemble and Maintain a Fat PS3

This is the process I perform on every FAT PlayStation 3 before I do anything else! The 19 blade fan isn't absolutely necessary, but I highly recommend installing one. They can be found on ebay for ~$20. The spray I'm using to clean with is 99.9% isopropyl alcohol, and I used some DeoxIT on that bit of corrosion I found on the edge of the board. This is not the same 2032 battery socket I used in the video, but this looks like a good fit for this mod because it has pads for wiring the connector to: https://amzn.to/3ia0a6Q Check out my Amazon shop! https://www.amazon.com/shop/retrocution DeoxIT Contact Cleaner - https://amzn.to/35Pzal5 Arctic Silver 5 Thermal Paste - https://amzn.to/2MpnIoy Largest HDD for PS3 - https://amzn.to/34OqzNZ Things I use all the time: iFixit toolkit - https://amzn.to/2ZiyjXw Soldering Iron - https://amzn.to/38Y61G6 Solder - https://amzn.to/34HUl7a Soldering iron tip cleaner - https://amzn.to/2EJniov Flux - https://amzn.to/35Pe7ir Solder sucker - https://amzn.to/2PPp8up Silicone Wire - https://amzn.to/35QoLWa Auto Wire Strippers - https://amzn.to/2MnnIFn Flush Cutters - https://amzn.to/394s265 99.9% Isopropyl Alcohol Aerosol - https://amzn.to/2Mo1vqG Multimeter - https://amzn.to/2s44Y7b *These are affiliate links. As an Amazon Associate I earn a commission on any purchases you make through these links. This really helps out the channel and I appreciate the help!*