DIY Hot Tub

A scratch built fibreglass Hot Tub! Composites materials list: www.polyfibre.co.uk NB we accidentally over ordered the resin and fibreglass matt by a factor of about 50%! 1.       2 x 5kg ISO/NPG Gelcoat heat and chemically resistant. 2.       10m² ECR glass tissue. 3.       33.0kg (55m²) 600grm C.S.M. 4.       3 x 25kg Isopthalic resin, heat and chemically resistant. 5.       2kg Catalyst (hardener). 6.       1 x 80ml dispenser. 7.       1 x 6” x 7/8” paddle roller. 8.       1 x 5ltr Acetone. 9.       1 x 0.5kg release wax. 10.   1 x 1ltr PVA. 11.   1 x 5ltr Primecoat. 12.   5 x 5ltr buckets. 13.   2 x 6” polyester rollers. 14.   10m² Peel Ply. Plumbing/parts list: www.poolandspacentre.co.uk GS100 pack. Waterway 50sq ft In-line Filter Assembly Waterway 3.5" Waterway Front Access Light Kit Balboa VL200 Topside Control Panel with Overlay GS100 heater assembly WP200 (2hp) - two speed pump Waterway Threaded Mini Storm Jet Body x8 Waterway 3" Mini Storm Directional Jet - Stainless Steel - x8 Waterway 1 x 2"female inlet + Dead End with 2 x 3/4" barbs Waterway 1 x 2"female inlets with 6 x 3/4"barb outlets Waterway 2" Suction Assembly - 200GPM (White) Flexible Pipe (2 inch) 5m Flexible Pipe (3/4 inch) 10m 4x 90 Degree Elbow - Plain Female/Female 2" 2x 45 Degree Elbow - Plain Female/Female 2" 2x Gate Valves (2") 3x Coupling (2" Coupling) 8x Waterway Spiggot Plug (3/8") Pipe Clamps - stainless steel (3/4") x 16 Reducer (2" x 1 1/2" Reducer - Plain) x 2 Plastic Pipe Cement (240 ml)