How to fix Polaris Glacier Pro plow from falling off ATV

This video walks through 2 methods for stopping your plow from falling off your ATV. 1) Keep the winch cable tight (This is NOT a fix - just something I did at first before finding the fix) 2) Adjust the locking mechanism. 5:19 -    • How to fix Polaris Glacier Pro plow from f...   (actual fix) From the manual: The red locking handle is adjustable to allow the lock mechanism to be adjusted to compensate for wear over time. To adjust the locking mechanism, loosen the lock nut H on the threaded shaft where it contacts the red handle as shown. Rotate the handle until proper adjustment is made, then retighten the lock nut H. The recommended adjustment setting is to adjust the locking mechanism so that it completely latches but does not have any free play in it then turn the red handle back (counterclockwise)1 full turn to give it approximately 1mm ( .040”) of free play between the bracket K and stop collar J seen below. It is recommended you perform this adjustment every 3 months of use. Link to the installation manual (see page 5): https://cdn1.polaris.com/globalassets...