Comment enlever un bouton pression abîmé (ou mal placé) très facilement - Astuce couture

Misplaced or damaged snap fastener? Don't panic, I'll show you how to easily remove it without damaging your fabric. In this video, I explain how to remove a snap fastener with Prym pliers (or any other similar pliers). Whether it's because you positioned it incorrectly, or because it was damaged during installation, there's a simple and effective solution for removing it cleanly. Here's how: – First, remove the small cap from the pliers, – Then, place the snap fastener between the two metal parts of the pliers: the small stem and the other end, – Next, press gently but firmly: the snap fastener will break in two, and you can remove it without forcing it. If you need to install a new one in a different spot, don't forget to iron the fabric over the old snap fastener: this will reactivate the fibers and erase the mark. And as always, I recommend practicing first on a piece of fabric if you've never tried this before. I regularly share tutorials like this one, usually one per week. And for most of them, there's a detailed technical sheet with all the steps, the necessary materials, and tips. The technical sheets are available for individual download, free of charge. But if you'd like access to the entire pack, it's €5 until July 31st. 👉 Starting August 1st, the pack will cost €8. https://capoucreation.podia.com/fiche... ❤️ And above all, don't forget the most important thing: take care of yourself.