BERNINA L 660 and L 650 Overlock Stitch Settings, Tip and Tricks

Are you overwhelmed by all the different settings on your BERNINA L 660 and L 650? In this video you will examine the possibilities you have with thread tension, cutting width, stitch length and differential feed when sewing different stitches and why you do not always use the default settings for your projects. Visit your local BERNINA dealer or learn more about the L 6 Series here: https://www.bernina.com/l6series Note: Not all models are available in all countries. This video and its contents were produced without AI. Find out more about the following: 00:00 – Welcome and introduction Doris 00:29 – overview and video contents 00:44 – Stitch selection and symbols 01:48 – Link to video needle change / threading 01:58 – Default settings 02:44 – Link to video for stitch optimization 02:51 – Upper looper converter and link to the threading video (03:10) 03:13 – The cutting width and how it connects to the stitch width 05:32 – Fabric cutting or not, knife on or off? 06:33 – Knife on, tips for the detailed procedure 07:06 – Stitch finger and rolled hem lever 08:16 – Link to the videos on overlock stitches and rolled hems 08:21 – What is mtc micro thread control? 10:11 – Tip, mtc is inactive when stitch finger on r 10:24 – The stitch length has a significant impact on your sewing results 12:02 – Differential feed, how does it work? 15:51 – Gathering with differential feed and stitch length 16:41 – Presser foot pressure tips 18:24 – Total stitch control 18:32 – Summary and link to more video tutorials 18:48 – Closing remarks