วิธีต่อใช้งานตั้งค่าโมดูลควบคุมชาร์จแบตเตอรี่XH-M604.mp4

#Battery Charging Control Module #Battery Charging Control Board Connection #Automatically Cut Off When Battery Is Full XH-M604 Board Order Link https://bit.ly/3jJ9jUZ Please follow, like, share, and click the bell. More Information Circuit, Images, and Details https://jekdiy.com/%e0%b8%a7%e0%b8%b4... https://jekdiy.com Follow the page at   / jek.diy   Details The XH-M604 is a 6V-60V lithium-ion lead-acid battery charge control module. Input voltage: DC. LED display Usage 1. Connect the battery to the BAT+/- position. When the indicator lights up, start the setup. 2. Set the full charge and cut off: Press and hold the right button for 1-2 seconds until the number flashes. Continue pressing the button until the set value is reached. For example, 13.7V. Release the button when satisfied. The board will save the setting. 3. Set the full charge and cut off: Press and hold the left button for 1-2 seconds until the number flashes. Continue pressing the button. When the voltage reaches the preset value, set it to full and cut off, such as 10.5V. When satisfied, release the button and the board will save the value. 4. Connect the charger to the IN position to begin testing. Factory Reset: When the power is turned on, press the Start/Stop button simultaneously. The digital display will display 888, indicating the factory settings. Note: This XH-M604 module is an economy model. Therefore, the value displayed on the 7-segment display may not match your multimeter. How to Use: 1. Connect the battery to the BAT+/- position. When the light is on, begin setting. 2. Set the voltage to full and cut off. Press and hold the right button for 1-2 seconds until the number flashes. Continue pressing the button until the preset value reaches full and cut off, such as 13.7V. When satisfied, release the button and the board will save the value. 3. Set the voltage to full and cut off. Press and hold the left button for 1-2 seconds until the number flashes. Continue pressing the button. When the value reaches the set value, cut it off, such as 10.5V. When satisfied, release the button and the board will save the value. 4. Connect the charger to the IN position to begin testing. Factory Reset: When the power is turned on, press the Start/Stop button simultaneously. The digital display will display 888, indicating the factory settings. Note: This XH-M604 module is an economy model. Therefore, the values ​​displayed on the 7-segment display may not match your multimeter.