Radio Calibration with PIXHAWK/Mini Pix/crossflight/Turbo Pix in Mission Planner

How to calibrate the transmitter with Mini pix? First, connect Mini Pix with the Receiver. Second, connect Mini Pix to the computer with USB cable. Third, Bind and set the data on the transmitter. Bind the receiver with the transmitter. The receiver should support SBUS or PPM signal output. Finally, calibrate the transmitter. Choose the MODEL TYPE in the transmitter. Then, make sure the throttle is reversed. open Mission Planner. Choose the right port and then click CONNECT. Click Hardware Con’fig-- mandatory Hardware-- Radio Calibration -- Calibrate Radio, click “OK” Move all sticks and switches to their extreme position. And you can check the movement of the bar is corresponding to every channel. More details about Mini Pix: https://www.radiolink.com/minipix FAQ of Mini Pix: https://www.radiolink.com/minipix_faq You can buy Mini Pix from Aliexpress Official Store or Amazon shop: https://www.radiolink.com/minipix_whe... More details about AT9S Pro: https://www.radiolink.com/at9spro FAQ of AT9S Pro: https://www.radiolink.com/at9spro_faq You can buy AT9S Pro from Aliexpress Official Store or Amazon shop: https://www.radiolink.com/at9spro_whe... You can send mails to [email protected] if you have any questions during using our products. #radiocalibration#missionplanner#minipix#at9spro#radiolink