Multiplex Lentus E Glider - Unboxing and Assembly Walkthrough Guide - Electric Glider 3M Wingspan

A little change of pace here as we continue to finish up a few other painting and flying videos, which will be released soon. Let's unbox and assemble the RR or receiver ready "Lentus" electric glider released by Multiplex. It has a 3 meter wingspan. It is made of Elapor foam like most other Multiplex products. This RR version comes equipped with 6 Hitec HS-65HB servos for elevator, rudder, ailerons and flaps already installed and wired. It is also sold as a kit without any of the electronics. Up front is a ROXXY C35-48-990kv Moto and ROXXY BL-Control 755 S-BEC speed controller guiding an 11x7" folding propeller. The stock setup can accept both 3S and 4S lipo batteries. Sold separately are an FES option (Front Electric Self launch) with optional retractable landing gear and 8x6 propeller to make the model self-launchable. It can also be setup to be towed. Having said that, it easily takes off (even without any headwind) via hand-launch even with a 3S lipo. The assembly is a breeze. The model comes with a bag of gummy bears. I had the entire model assembled before finishing the bag of gummy bears. Just bolt on the horizontal stabilizer and setup your receiver / radio. The wings and fuselage come pre-wired with multiplex connectors for easy plug and play setup at the field. Overall a winner. Stay tuned for the maiden video and flight footage!