Using the PreSonus StudioLive Aux Outputs

In this video I explain how to use the PreSonus StudioLive 16.0.2 Aux Output and how to set up a mono or a stereo monitor setup on your StudioLive 16.0.2 USB. The PreSonus StudioLive 16.0.2 USB is a 16 channel digital mixer. It has 12 XLR inputs or 16 1/4 inch TRS line level inputs spread over 12 channels. Channels 9/10, 11/12, 13/14 and 15/16 are able to be a mono or stereo channel on the same fader where channels 1-8 can be linked to make a stereo input. The board has 4 mono aux sends which can be paired into two stereo auxes as well as two built in effects racks for adding reverbs, delays and modulation effects. The channels have +48V Phantom Power, Polarity Reverse, HPF, Gate, Compressor/Limiter and a 3-band parametric EQ. Additionally on the console is a USB connection to bring 18 channels in and 16 channels out of your favorite DAW like PreSonus Studio One Artist. Products Shown in this Video: PreSonus StudioLive 16.0.2 USB Sweetwater: https://sweetwater.sjv.io/Y9Grxj Guitar Center: https://guitar-center.pxf.io/75rW7Q Chapters: 00:00 Introduction to PreSonus StudioLive 16.0.2 Aux Output 00:44 Overview of the StudioLive Aux Output 01:08 Setting up a Stereo Aux Output 01:46 Mixing Monitors on StudioLive 16.0.2 02:24 Mixing a Stereo Aux Output on the StudioLive 03:49 StudioLive 16.0.2 System Settings for Aux Output 04:09 StudioLive 16.0.2 Aux Output Pre Fader or Post Fader 06:54 Setting up a Stream Feed on the PreSonus StudioLive 16.0.2 USB 08:38 Aux Output Metering 09:28 Sending Effects to Auxes on the StudioLive 16.0.2 10:08 Conclusion