How to Lift a Chipboard Floor, Batten Joists and Re-Fit the Chipboard - Remove Chipboard Floorboards

Electrician Matt shows you one way of how you can lift a floorboard with this floor being a chipboard floor it's not the easier to lift as tongue and groove boards. Matt used both a battery Dewalt circular saw and multi tool whilst lifting an inspection hatch in a chipboard floorboard. Matt shows the importance of setting your circular saw blade before completing the cuts with him multi tool. After lifting the floor Matt battens the area around the hole so he can put the chipboard floor back down. Every day electricians and plumbers have to life floorboards to run cables and pipes so it’s important that you master this skill. = 🕐 Time Stamps - Cut to the action 🕕 == 00:00 - How to lift a chipboard floor to run cables 00:22 - Adjusting the blade on a circular saw 00:38 - Cutting across the join of the floorboards 01:36 - Cutting using a multi tool 03:18 - Removing the cut section of chipboard flooring 03:51 - Just missed pipework under the floor 04:14 - Replacing the floorboard 04:47 - Adding battens to hold the replaced chipboard floor 06:33 - Screwing the floorboard back down Videos of other ways to lift or access an underfloor area. 👇🏻 ☑️ Remove the Tongue then Lift a Floorboard    • How to Cut and Remove the Tongue then Lift...   ☑️ Cavity Master -    • Chipboard floor access hole using the Cavi...   Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E assessments. You can follow me day by day on Facebook, Instagram and Twitter lookout for "GSH Electrical. ▶️ FACEBOOK   / gshelectrical   ▶️ INSTAGRAM   / brihzmraygdtmjmdb9lunqodmevqsbddki3qpq0   ▶️ TWITTER   / gsh_electrical   #GSHElectrical #Electricaltrainingvideos