Испытал балку из ПЕНОПЛЭКСА для межэтажного перекрытия в доме из экструзионного пенополистирола...

Having started building an extension out of extruded polystyrene foam, I realized I was a pioneer in two-story, outbuilding construction of this type of building! 🔥 Subscribe to the Good Wood channel - all about country houses: https://vk.cc/cirhi3 After erecting the first-floor walls, as shown in the video on the BATINA USADBA channel, many questions arose about the interfloor ceiling and roof... Not only viewers had questions, but I did too! Or rather, I was faced with a choice: which ceiling option to choose for my extension! I identified two main criteria for the future ceiling and the beams on which it would rest! Firstly, it needs to be lightweight, so that the extruded polystyrene foam walls can withstand the load, and secondly, it needs to be reliable, because besides me, there will be other members of our seven-child family here, plus guests... Considering the weight of responsibility, I decided to first test a beam made of extruded polystyrene foam, using the cheapest technology, because there are options for increasing the production cost of such a beam... But to make a beam from EPS, you need to work hard and reproduce all the stages of creating a multilayer composite material! First, you need to cut the EPS into 20 cm wide strips, then thicken them with an old wood saw blade for better adhesive adhesion, glue the strips together in a brick pattern with foam adhesive, let them cure, and then reinforce with fiberglass mesh and a special thermal insulation adhesive to create a composite material! Thanks for your support: https://www.donationalerts.com/r/rachkok Qiwi card (Russian bank) 2200730247433234 08/25 Yumaney 410015319078865 MIR card (Belkart) 9112384108779293 03/25 First-floor walls made of penoplex:    • Стены первого этажа из ПЕНОПЛЭКСА по беска...   Mini house made of foam:    • Мини дом из ПЕНОПЛАСТА за копейки и без оп...