แอร์รถยนต์ ไม่เย็น ตู้แอร์รั่ว วิธีถอดคอนโซลเปลี่ยนตู้แอร์ ไทรทัน แบบละเอียด กะบะตอนเดียวTriton 2017

#Car air conditioner not cool #d-max #v-cross #hi-lander #1.9 engine #How to remove the airbag #How to remove the air conditioner fan motor #How to clean your car air conditioner yourself #Why doesn't the car's air conditioner cool? There's only wind. #Cleaning the car air conditioning cabinet without removing the cabinet In general, cleaning the car air conditioning cabinet without removing the cabinet will specify the solution that must be used only for cleaning. And this type of washing is suitable for new cars. A car that cleans the car air conditioner once a year or is suitable for a car that takes care of the car air conditioner regularly. The advantage of cleaning the air conditioner like this is that it is not difficult, there is no need to dismantle the console. Easier to clean The cost is cheaper than removing the car air conditioner. It takes less time @134 #Air conditioner #Car air conditioner not cool. #The car air conditioner is not cool. #Why don't you have car air conditioning? There's only air. @134 Working principles of car air conditioning systems. It is a vapor or gas compression refrigeration system. The compressor (COMPRESSOR) will act to suck the refrigerant from the evaporator (EVAPORATOR) refrigerant. At that time it still existed as a gas and compressor. It also serves to compress the refrigerant into the condenser (CONDENSER), causing the refrigerant to increase in temperature and pressure. When the refrigerant flows through the condenser, the temperature drops. The refrigerant will then continue to flow. Receiver/Dryer (RECEIVER/DRYER) to filter dirt and moisture contaminants in the refrigerant flowing to application valve (EXPANSION VALVE) and then inject it as a fine mist into Evaporator This causes the refrigerant to have a low pressure and absorb heat from the outside. to achieve a gaseous state Makes the outside temperature drop. After that, the gas refrigerant It will be sucked into the compressor. to start working again Keep repeating.