The Red Baron Saga 3 ( 17 inch wheels conversion Test Ride)

We have changes the Xpulse 2004V wheels with a 17 inch conversion kit. The hub are from the same bike, wheels are from Hero's Mavrick 440. We have also swapped the fork with the Pro forks with rebound and compression adjustability. The rear shockers are still Stock . This we'll probably changed it in the near future. The wheels are put together by Moto Den. A custom shop specializing in custom wheels and they have also provided the spokes as well. Tyres are MRF Revz D front and rear, 110 and 150 front and rear.. What it's like.. We'll the whole geometry of the bike changes with the smalle wheels and we're still in the process of finalising the overall geometry. The forks are around 5 inch longer than the stock forks so we've got room to play with. But, the limiting factor of the geometry is the rear shocker which is shorter than the Pro shocker by about 3- inches. As you will withness in the video the handling is not bad at all.. holding it's own in the corners and keeping up with a much faster bike. The whole suspensions swapped and set-up has been done at Skunk Works Garage. The whole project cost is around ₹ 30, 300 fro the forks , rims, hubs, wheel bearings and dust seals. ₹ 3,000 for putting together the wheels at Moto Den ₹ 11,00 for the tyres And this is without the set-up fees from Skunk Works Garage, which is free of cost.. we are super greatful 🙏 to them.. So total cost ₹ 44,300 /- 😎🤟