Yamaha YXZ1000 Wheel Bearing Replacement | Replace Wheel Bearings on a YXZ1000R | Partzilla.com

Buy YXZ1000R replacement wheel bearings and special tools to perform a wheel bearing replacement on your Yamaha YXZ1000R: https://bit.ly/YXZ1000R-wheel-bearing... See how to replace the wheel bearings on a Yamaha YXZ1000R in this video from Partzilla.com. A note about the parts for this job: you’re going to need two bearings PER SIDE, so to do both the right and left front of the unit, you’ll need FOUR of the wheel bearings: https://www.partzilla.com/product/yam... Also, the inner and outer oil seals are DIFFERENT PART NUMBERS: Outer seal: https://www.partzilla.com/product/yam... Inner seal: https://www.partzilla.com/product/yam... So for each side, TWO bearings, one INNER seal, one OUTER seal. We’re going to have to do some disassembly to start. John will show you how to remove the steering knuckle in order to access the wheel bearings. We’ll remove the brake caliper, steering arm, and get the upper and lower A-arms removed. Then, we’ll remove oil seals and the bearings. You’ll need a bearing puller, which you can find here: https://www.partzilla.com/product/suz... Some people have had luck using chisels to get them out, but we’ll use a puller. Once they’re removed, we'll work on getting replacement wheel bearings pressed back in. This Motion Pro bearing driver set is what we used: https://www.partzilla.com/product/aft... With the bearings in, we’ll replace the seals and get everything back together again. Read how to do this job step by step: https://www.partzilla.com/blog/yamaha... See the steering diagram for your YXZ1000R here: https://www.partzilla.com/catalog/yam... See the wheel bearings in this wheel diagram for the YXZ1000R: https://www.partzilla.com/catalog/yam... We also replaced the front ball joints on our YXZ1000R. Check it out here:    • Yamaha YXZ1000 Ball Joint Replacement | YX...   VIDEO HIGHLIGHTS: Removing the steering knuckle - 1:00 Removing the brake caliper - 1:15 Removing the steering arm - 1:40 Disconnecting shock mount - 2:55 Removing oil seals - 6:08 Removing wheel bearings - 6:48 Driving new bearings - 9:25 Replacing oil seals - 10:45 Installing steering knuckle - 12:30 Installing CV axle - 13:30 Replacing the hub - 15:30 Replacing the caliper - 16:45 Find thousands of Yamaha OEM Side by side parts here: https://www.partzilla.com/catalog/yam... Talk to us: Twitter:   / partzilla   Facebook:   / partzilla   Instagram:   / partzilla   In the video we’re working with a 2016 Yamaha YXZ1000R, but you may have similar steps for your Yamaha side by side. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you. RELATED CONTENT: YXZ1000R front brake pad change:    • Yamaha YXZ1000R Front Brake Pad Change | H...   YZX1000R oil change:    • Yamaha YXZ1000R Oil Change | How to Change...